Simulation process manager dynamic Process 3D is a simulation engine organizing the simulation process.
Simulation process manager must be Set As **Super**

Properties for simulation process manager are as follows:

**X_steps**- number of dynamic simulation time steps (x axis on the graphs)**Y_steps**- number of two-dimensional graphs to be computed and plotted (y axis on the graphs)-
**dyn_stat_steps**- number of static simulation steps to be performed before starting dynamic simulation (in some cases helps to adjust initial values of parameters) -
**tau**- inverse value of time step length (100 … 1E7) -
**epsapi**- maximum absolute error value -
**epsri**- maximum relative error value -
**numofcomps**- number of hydraulic elements in the scheme -
**maxiter**- maximum number of iterations (1 … 1000) -
**adjust**- adjust coefficient for calculating new iteration value (0.001 … 1) -
**fluid_type**- type of the working fluid (HLP10, HLP15, HLP22, HLP32, HLP46, HLP68, HLP100) -
**fluid_temp**- temperature of the working fluid, 0C, ( -10, 0, 10, 20, 30, 40, 50, 60 ) -
**fluid_vol**- volume of air in the working fluid, (0 … 0.05) -
**fluid_ka**- polytrope exponent of the working fluid (1 … 1.4) -
**gr_red_rate**- integer value n, setting that only every n-th calculated point to be plotted in output graph -
**delAllGraphs**- sets a way how plotted graphs windows most be deleted, true - delete all the graphs if one graph window is deleted false - allow to delete one graph at once